Full Access Members Only

Hitch a Ride: Gear & Tone


Get Full Access Today To Learn

Hitch a Ride

Plus 11,000 More Guitar Lessons.

Product Cost Lessons Instructors Instructor Help New Lessons Return Policy
Guitar Tricks $19.95 11,000+ 45 Instructors Yes Yes, Weekly 60 Days
Guitar Dvd's $30 - $60 20 - 30 1 Instructor No Interaction No No
Guitar Books $20 - $40 30 - 40 1 Instructor No Interaction No No
Other Sites $20 - $40 100 - 500 1-5 Instructor Sometimes Sometimes 3-7 Days
In-person $40 - $80 1 Hour 1 Instructor Yes Yes No
Guitar 1 is an acoustic guitar. Any acoustic is suitable to play this song, but one with a brighter tone will help cut through the band better.

The electric guitar tones on display here in this song are the stuff of legend. They were very unique sounding for the time period of the mid to late 70s. An additional Graphic EQ is a really big part of the tone shaping, so, that said, the choice of guitar here matters a bit less.

A Les Paul guitar was used for all the electric tones on this
recording. There is debate as to whether P90 pickups or humbucker pickups were used. The good news is that these pickups sound very similar. A P90 can be described as a clearer but noisier version of a humbucker. Either pickup in the bridge position will do the trick.
As far as amps go, a Marshall style tube amp is the best choice. Crank up the preamp gain to full for a big crunch sound. Roll down the bass control, crank the mid control to halfway, and set the highs to around 3/4.

Guitar 2 uses a cleaner sound, so roll down the preamp gain or roll down your volume control on your guitar to clean up the sound.
As I mentioned earlier, the tones are EQ'd even further using a 6 band EQ pedal. The general approach here is to emphasize the lower mids (500-800 Hz) and pull down everything else. This effectively "slots" the guitar somewhere between the bass and the vocals. Beware though, that radical EQing like this makes the guitar sound rather thin if you are playing by yourself. However in the context of a dense mix, it sounds very cool. The EQ pedal is placed between your guitar and the amp.

Guitar 3 is the crunch guitar layer, that explodes into the mix under the organ solo with some aggressive riffing. After the organ solo, this guitar continues on through the final chorus, but adds a rotary speaker effect to add a whole new texture to the mix.

The lead guitars (Guitar4 and Guitar5) use heavy compression, chorus, and delay for extra sustain and lushness. Guitar 2 also uses some chorus to widen out the sound. The use of heavy effect processing like this on electric guitars started to creep into recordings around the mid 70s, and this song was definitely at the head of the charge. This "ultra-produced" sounding approach was definitely a precursor to the heavily effected guitar sounds of the 80s.

Add some reverb to all guitars for depth. Here are the settings I used:

Marshall Plexi Model:
Drive: 100% Bass: 10% Mid: 50% Treb: 75% Presence: 65%
7 Band Graphic EQ:
100Hz: -25% 200Hz: -25% 400Hz: +50% 800Hz: +100%
1.6kHz: -25% 3.2KHz: +40% 6.4KHz: 0
Input: 50% Sustain: 85%
Rate: 20% Depth: 70% Wet/DryMIX: 35%
Time: 325ms Feedback: 40% Wet/DryMIX: 20%
Rotary Speaker Effect (Guitar 3):
Speed: Slow Tone: 50%
Plate Reverb:
WetDryMIX: 40%

TUNING: 1/2 step up : (low to high) E# A# D# G# B# E#